Model A Ford Vacuum Windshield Wiper Arm - Stainless Steel - Replacement Style - Motor Mounted InsideAlso Fits 1932-1936 Passenger and 1932 & 1935-1936 Commercial ModelsOverall length is 7-3/4".
This authentic style wiper arm was used on the 1930-31 Deluxe Open Cars and the 68B Cabriolet. Chrome with Trico embossing on clip Lenght: 17 cm A-Ford 1930-31
For the Model A's that had the wiper motor mounted outside the car A-Ford 1928-31 OEM: A-17529 Wiper blade used: H10676 of H10677
7 1/2" arm extends to 11 1/2" ( 19 up to 29 cm) Hook and saddle style Made to clamp down on a shaft that is.235" (Ø 6 mm) in diameter.
Lenght of blade: 19 cm. A-Ford 1928-31 Ford V8 1932-1940 Vervangt: A17528 A7036
Lengte blad 21 cm.A-Ford 1930-31Ford 1928-40Vervangt: A17528B, A7037-1
A-Ford 1928-2973.5 cm longA9700B
The valve assembly that mounts in the firewall to control the heat coming in from the manifold heater H9382
Not original but a great accessory item. Polished stainless plate that screws to the floorboards to hold your gearshift boot in place. Includes screws. 1928-31
If you need a smoother running engine with less vibration - this is what you need. It mounts to the crossmember on two rubber mounts. Two holes are needed to be drilled on the crossmember - ideal if front crossmember center hole is worn out. It saves...
This auxiliary spring is frequently missing. It holds the 2 small coil springs in place on the front motor mount
2 long and 1 short
Brass bushing fits into cross member from underside as part of motor mount supportModel A, 1928-31OEM: A-6034
This heater bolts onto the stock manifold with no cutting or welding. Complete with firewall valve to control the heat. Easily removed for summer driving
7 Piece Set includes - auxiliary spring, 3 coil springs, washer, castle nut, and cotter pin
Fits 1930-31 open cars,the only glass cut to the original specifications, with beveled edges. Sold in pairs only Size: 32.5 x 20.5 cm OEM: A-18252-CD
Chrome plated clamps for the wind wing glass. Comes with glass patterns. Price is for a kit, that is enough for both sides of the car
A-Ford April 1930 - 31Returns gas pedal to idle position, Mounts on accelerator shaft and bracketA9737
This is the straight cylindrical spring used from 1928 to early 1930
A35244Nail included
A9765P
A11471P
A-Ford 1928 tot Aug 1930
2 Piece steel, holds felt in place around pedals and steering column to keep air and fumes out.
This heavy felt pad fits tightly around the steering collumn and the pedals when usd with the H8714 steel plate